ADDITIONAL BRACKET FOR TILE ROOF BASEThe additional tile roof bracket is used to adjust the main roof foundations on tiled roofs, in any case where the foundation cannot be fixed to the upper side of the formwork. The bracket has two (2) oval-shaped holes, 37 mm long, thus offering additional flexib..
The Cable collector clip is still a novel component of the support system, which aims to collect and keep tidy all the cables power of PV panel. It has a special plastic suspension and can hold up to three (3) wires of different diameters.The clips are placed in the rail before the installation of P..
End Clamp Set is the appropriate component from the companys PV Mounting System, for fastening the outer edges of PV frames on the aluminum rails.The lower portion is adjusted to the rail, while the upper portion holds the panels.SpecificationsEnd Clamp Set consists of..
Middle Clamp Set is the appropriate component from the companys PV Mounting System, for fastening the inner edges of PV frames on the aluminum rails.The lower portion is adjusted to the rail, while the upper portion holds the panels.SpecificationsThe Middle Clamp Set consist..
The rails are aluminum extrusions, light type, which are designed to support photovoltaic frames. The aluminum profiles have two (2) horizontal channels, one (1) from every side. Into the horizontal channels cable clips are fastened. It also has two (2) lateral canals, one in every side that i..
Rail Connector Set is a component of the support system and is used in cases where we want to connect two (2) separate rails, in the same system.The connector is designed and used in a way that will save time and reduce wasted material.SpecificationsThe Rail is made of aluminum profiles with dimensi..
The Tile Roof Base Additional Brackets is an auxiliary part of the Bases Type I and Type II.It is placed under the tread of the base and is used where it is not possible to tighten the mounting in a tile roof beam or in any other point.Display of the brackets in a fully assembled format, together wi..
Mounting Systems top item, is the Tile roof base Type I as shown in the Figure. This base is protected by the Industrial Property Organization (OBI), with a specific patent. Very soon it is expected to be enforced as well by the EUROPEAN PATTERN OFFICE.SpecificationsThe Tile Roof Base Type I is cons..