New
Model: 150.3070
ADDITIONAL BRACKET FOR TILE ROOF BASEThe additional tile roof bracket is used to adjust the main roof foundations on tiled roofs, in any case where the foundation cannot be fixed to the upper side of the formwork. The bracket has two (2) oval-shaped holes, 37 mm long, thus offering additional flexib..
0.00€
Ex Tax:0.00€
Model: 150.1180-6.4 м , 150.1182 - 5.8 м
Upper support rail for gripping photovoltaic panels...
0.00€
Ex Tax:0.00€
Model: 150.1192 - 3.3м, 150. 1191 - 4.4м, 150.1190 - 6.2м
Aluminum rail - double sided, for mounting with T bolts...
0.00€
Ex Tax:0.00€
Model: 150.1120
The Aluminum Rail (Giant) are aluminum extrusions, light type, which are designed to support photovoltaic frames.The aluminum profiles have two (2) horizontal channels, one (1) from every side. Into the horizontal channels cable clips are fastened. It also has two (2) lateral canal..
0.00€
Ex Tax:0.00€
Model: 150.3062
Fastener for sheet metal roof..
0.00€
Ex Tax:0.00€
Model: 150.2030
The Cable clip is still a novel component of the support system, which aims to collect and keep tidy all the cables power of PV panel. It has a special plastic suspension and can hold up to three (3) wires of different diameters.The clips are placed in the rail before the installation of PV panels a..
0.00€
Ex Tax:0.00€
New
Model: Конструкция за едноредов монтаж
Construction for single-row ground mounting...
0.00€
Ex Tax:0.00€
New
Model: Конструкция изток-запад
East-West Land Construction..
0.00€
Ex Tax:0.00€
Model: 150.2111/50-36mm/. 150.2121/40-26mm/
End Clamp Set is the appropriate component from the companys PV Mounting System, for fastening the outer edges of PV frames on the aluminum rails.The lower portion is adjusted to the rail, while the upper portion holds the panels.SpecificationsEnd Clamp Set consists of..
0.00€
Ex Tax:0.00€
Model: 150.5010
The Flat Mounting Frame II is used to support PV panels in a loft or outdoor. Frame is manufactured by aluminum profiles which are connected to each other creating a trapezoidal layout with an angle to the horizontal plane of the 30 degrees.All the frames are certified for static e..
0.00€
Ex Tax:0.00€
Model: 150.5020
The Flat Mounting Frame III is used to support PV panels in a loft or outdoor. Frame is manufactured by aluminum profiles which are connected to each other creating a trapezoidal layout with an angle to the horizontal plane of the 30 degrees.All the frames are certified for static ..
0.00€
Ex Tax:0.00€
Model: 150.5030
The Flat Mounting Frame IV is used to support PV panels in a loft or outdoor. Frame is manufactured by aluminum profiles which are connected to each other creating a trapezoidal layout with an angle to the horizontal plane of the 30 degrees.All the frames are certified for static e..
0.00€
Ex Tax:0.00€
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28