Mounting system for photovoltaic plants, solar and photovoltaic panels on a flat roof. New technologies on a patented system and certified by TÜV AUSTRIA
Model: 150.1180-6.4 м , 150.1182 - 5.8 м
Upper support rail for gripping photovoltaic panels...
0.00€
Ex Tax:0.00€
Model: 150.1192 - 3.3м, 150. 1191 - 4.4м, 150.1190 - 6.2м
Aluminum rail - double sided, for mounting with T bolts...
0.00€
Ex Tax:0.00€
Model: 150.1120
The Aluminum Rail (Giant) are aluminum extrusions, light type, which are designed to support photovoltaic frames.The aluminum profiles have two (2) horizontal channels, one (1) from every side. Into the horizontal channels cable clips are fastened. It also has two (2) lateral canal..
0.00€
Ex Tax:0.00€
Model: 150.2030
The Cable clip is still a novel component of the support system, which aims to collect and keep tidy all the cables power of PV panel. It has a special plastic suspension and can hold up to three (3) wires of different diameters.The clips are placed in the rail before the installation of PV panels a..
0.00€
Ex Tax:0.00€
Model: 150.2111/50-36mm/. 150.2121/40-26mm/
End Clamp Set is the appropriate component from the companys PV Mounting System, for fastening the outer edges of PV frames on the aluminum rails.The lower portion is adjusted to the rail, while the upper portion holds the panels.SpecificationsEnd Clamp Set consists of..
0.00€
Ex Tax:0.00€
Model: 150.5010
The Flat Mounting Frame II is used to support PV panels in a loft or outdoor. Frame is manufactured by aluminum profiles which are connected to each other creating a trapezoidal layout with an angle to the horizontal plane of the 30 degrees.All the frames are certified for static e..
0.00€
Ex Tax:0.00€
Model: 150.5020
The Flat Mounting Frame III is used to support PV panels in a loft or outdoor. Frame is manufactured by aluminum profiles which are connected to each other creating a trapezoidal layout with an angle to the horizontal plane of the 30 degrees.All the frames are certified for static ..
0.00€
Ex Tax:0.00€
Model: 150.5030
The Flat Mounting Frame IV is used to support PV panels in a loft or outdoor. Frame is manufactured by aluminum profiles which are connected to each other creating a trapezoidal layout with an angle to the horizontal plane of the 30 degrees.All the frames are certified for static e..
0.00€
Ex Tax:0.00€
Model: 150.5000
The Flat Mounting Frame I is used to support PV panels in a loft or outdoor. Frame is manufactured by aluminum profiles which are connected to each other creating a trapezoidal layout with an angle to the horizontal plane of the 30 degrees.All the frames are certified for static ef..
0.00€
Ex Tax:0.00€
Model: 4433
We have the ability to design and produce frames for supporting PV modules, depending on the desires of each client individually.Some examples of structures are shown in Figures.What exactly the customer has to do is to give us the desired dimensions of the table shown in the image.Then ..
0.00€
Ex Tax:0.00€
Model: 150.2110/50-36мм/ , 150.2120/40-26мм/
Middle Clamp Set is the appropriate component from the companys PV Mounting System, for fastening the inner edges of PV frames on the aluminum rails.The lower portion is adjusted to the rail, while the upper portion holds the panels.SpecificationsThe Middle Clamp Set consist..
0.00€
Ex Tax:0.00€
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28